Resineo drain HP

High performance resin for marble coating porous

Charasteristics

Nature of the product HP two-component resin-based product
Can be stored for 9 months from the date of manufacture, in its original sealed packaging and indoors between 5°C and 30°C.
Transport Not classified (tested for transport at 60°C for 3 weeks)
Packaging 2.5 kg kit (1.5 kg of PART A + 1 kg of PART B).
5.0 kg kit (3 kg of PART A + 2 kg of PART B)
20 kg kit (12 kg of PART A + 8 kg of PART B)
Pot life 1h30 to 3h (varies depending on temperature and humidity).
Opening to private pedestrian flow 24h (varies depending on temperature and humidity).
Opening to private VL traffic 48h (varies depending on the temperature and humidity).

Benefits

✓ Translucent resin for coatings of skid-resistant, porous and decorative floors.
✓ Draining capacity from 30 to 50 L/second/m² (varies depending on the thickness and grain size distribution).
✓ High mechanical performance and high UV resistance (according to the NF EN 196-1 and ISO11341
standards).
✓ Applicable from 5°C to 40°C and 30% to 90% relative humidity
✓ Can be applied in private estates on the paths, around swimming-pools and terraces (compacted gravel and
concrete substrate).
✓ Can be applied to carriage ways with private light vehicle and heavy vehicle traffic

Permitted Substrates

✓ Platform substrate: sub-base + base course with compacted gravel (untreated gravel EN 13285 or cement
treated gravel NF EN 14227) compliant with GTR NF – P 11-300.
✓ Concrete slab (compliant with DTU 21/13.3)
✓ Existing sealed or glued tiling (not cracked and cohesive, compliant with DTU 52.1)
The tiling and concrete slab substrates should have a minimum slope of 1.5% for terraces and 2% around
swimming-pools. The platform substrate must have a minimum slope of 1%.
Swimming pool enclosure: it is compulsory to use a fixed rail system or fit the swimming-pool enclosure with
soft wheels to prevent the coating from getting damaged.

Consumption, thicknesses and area performance

Aggregates : 25 kg bags with 2.0-5.0mm or 3.0-6.0mm grain size distribution of washed,
dried marble aggregate.
Concrete substrate : Minimum 1.0 cm (private pedestrian flow – ResiREV trowelling machine smoothing)
Minimum 1.5 cm (Light and heavy vehicle private traffic – 60cm mechanical trowel)
Tiling substrate : Minimum 1.0 cm (private pedestrian flow – ResiREV trowelling machine smoothing)
Platform substrate : Minimum 3 cm (Light and heavy vehicle private traffic – 60cm mechanical trowel )
Resin kit content/bag : One 2.5 kg RESINEO DRAIN HP kit for 2 x 25 kg bags.
One 5.0 kg RESINEO DRAIN HP kit for 4 x 25 kg bags
One 20.0 kg RESINEO DRAIN HP kit for 16 x 25 kg bags or 400 kg big bag.
Technical sheet_RESINEO DRAIN HP
Consumptions by m² : One 2.5 kg RESINEO DRAIN HP kit + 50 kg aggregate = 3 m² (1 cm thick)
One 5 kg RESINEO DRAIN HP kit + 100 kg aggregate = 6 m² (1 cm thick)
One 20 kg RESINEO DRAIN HP kit + 400 kg aggregate = 24 m² (1 cm thick)

Conditions for application

✓ Temperature of the substrate and ambient air: +5°C to +40°C.
✓ Humidity of the substrate: dry substrate (no rain for 24h).
✓ Air humidity: between 30% and 90% RH (relative humidity).
✓ Check the absence of precipitation in the 12 hours that follow the work.